Full range of render only beads in a range of sizes available in:
- POWDER COATED GALVANISED STEEL
- STAINLESS STEEL
- ALUMINIUM
- PVCU
Optional PVC nosings available in a variety of colours.
PLEASE SEE LINKS FOR THE FULL RANGE
Base and Stop Profiles for insulation boards. available in:-
-Aluminium box shaped profiles with optional clip
-'6' and '8' series - manufactured in Powder Coated galvanised Steel or Stainless Steel.
PLEASE SEE THE LINKS FOR DETAILS
Used as insect/rodent/bird mesh and for ventilation and drainage purposes.
SEE LINKS FOR DETAILS
- FIBREMESH FOR RENDERING AVAILABLE IN 2 GRADES.
- INSECT SCREENING MESHES AVAILABLE IN FIBREGLASS, ALUMINIUM AND STAINLESS STEEL.
Sills and Flashings:-
Suitable for most conditions requiring the weathering of External Wall Insulation Systems and Rendering.
A low tack film will protect the section during transportation and fixing on-site.
Pre-cut lengths, push fit or welded end caps are available on request. Jointing pieces to suit any section can be supplied where continuous lengths of flashings are installed and clips can be supplied to retain the projecting nose of the section if required.
-Standard white range held in stock
- Made to order service. Powder coated to any standard RAL colour.
Aluminium Copings are an economical, weatherproof and easily installed finish to parapet and balcony walls.
APPEARANCE: Mill finish or polyester powder coated, after fabrication to any of our standard range colours.
COMPOSITION: Copings are fabricated from alumium alloy sheet or stainless steel, in varying thicknesses. Fixing straps are 3mm thick aluminium with a neoprene strip if required.
THERMAL MOVEMENT: A gap of 2-3mm left between coping sections will accomodate normal thermal movement.
WIND RESISTANCE: Wemico copings have been satisfactorily used in many locations. it is essential that copings are properly fixed to enable them to meet design performance.
ACCESSORIES: 90 degree corners and T junctions, stopends or closed ends, upstands and joints are available. Irregular corners can also be made.
SIZING: When specifying or ordering, state the total wall width including finishes, rendering, asphalt or flashings. Standard length is 2.5m but other lengths can be made to order.
FIXING: Secure fixing bracket to the top of the wall at 600mm centres. Place coping over the bracket and push down firmly to clip over the bracket flanges. Leave a 2-3mm expansion gap at all joints.
Made to Measure access panels with louvres. Z brackets available to suit.
Feature Channels, made to measure. Available in Aluminium powder coated to standard RAL colours or Stainless Steel. Please contact us for a quotation.
